Home Resources Analysis of Chilton Ionosonde Critical Frequency Measurements During Solar Cycle 23 in the Context of Midlatitude HF NVIS Frequency Predictions

Analysis of Chilton Ionosonde Critical Frequency Measurements During Solar Cycle 23 in the Context of Midlatitude HF NVIS Frequency Predictions

an image of our technical paper

This paper presents a comparison of Chilton Ionosonde critical frequency measurements against vertical-incidence HF propagation predictions using ASAPS (Advanced Stand Alone Prediction System) and VOACAP (Voice of America Coverage Analysis Program).

This analysis covers the time period from 1996 to 2010 (thereby covering solar cycle 23) and was carried out in the context of UK-centric near-vertical incidence skywave (NVIS) frequency predictions.

Measured and predicted monthly median frequencies are compared, as are the upper and lower decile frequencies (10% and 90% respectively).

The ASAPS basic MUF predictions generally agree with fxI (in lieu of fxF2) measurements, whereas those for VOACAP appear to be conservative for the Chilton ionosonde, particularly around solar maximum.

Below ~4 MHz during winter nights around solar minimum, both ASAPS and VOACAP MUF predictions tend towards foF2, which is contrary to their underlying theory and requires further investigation.

While VOACAP has greater errors at solar maximum, those for ASAPS increase at low or negative T-index values.

Finally, VOACAP errors might be large when T-SSN exceeds ~15.

M. C. Walden, “Analysis of Chilton Ionosonde Critical Frequency Measurements During Solar Cycle 23 in the Context of Midlatitude HF NVIS Frequency Predictions”, IET International Conference on Ionospheric Radio Systems and Techniques (IRST 2012), York, UK, 15–17 May 2012.

doi:10.1049/cp.2012.0373

Access this Technical Paper

some of our article authors

Articles

Gain insights into the latest engineering advancements through our expert articles.

Plextek HQ

About Us

Born in the Cambridge Technology Cluster, for over 30 years companies have been coming to us to tackle their hardest engineering challenges that need outside-the-box thinking.